Most Fiber drawing machine are created professionally and are meant to work effectively for a long time. While this is the case it doesn’t imply that the units don’t develop problems. Just like any other units, the cables develop problems and it’s up to you to distinguish and correct them. To assist you here are some of the most common fiber optic fiber problems:
External damage. Common external damages are splits and scratches on the units. The units are highly sensitive; therefore, including the most minor damages are able to prevent effective transfer of signals. In case you have noticed some defects on your units you need to replace them as soon as possible.
The optic cable is just too long. Optic fibers can be found in different sizes and lengths and it’s your decision to find the one that is ideal for the application. In some instances, people install units which are very long than needed. A cable that is too long reaches the potential risk of winding around itself. A lengthy unit can also be at the chance of bending or twisting. These actions often result in permanent injury to the Fiber drawing machine as well as its components. To avoid installing the incorrect scale of cable you should take your time to utilize a measuring tape and look at the distance that you are looking to cover.
Improperly installed connectors. Connectors join 2 or more cables and play an important role in determining the effectiveness of the optic cables. It’s common for many contractors to improperly install the cables resulting to cable problems. To repair the difficulties you ought to hire a seasoned contractor to set up the cables properly.
Stretching. It’s a mistake to have optic cables that are too much time. It’s also a mistake to possess cables which can be short because they are susceptible to stretching. As i have said, the cables are extremely sensitive and even a minor damage can prevent the cables from in working order. To avoid the cables from stretching you need to ensure that you install them at the best place. You okgjlq also avoid pulling the cable jacket during installation. The most effective way of going about it is applying grips in the connectors.
Old age. The same as anything else under the Secondary coating line get old. Old cables are not only ineffective inside their working, in addition they have a tendency to develop problems every now and then. When your cables are old, the best way of fixing them is replacing them. We specialize in making machines that help you in the making of fiber optic cables. We have Secondary coating line. We have SZ stranding line and lots of other units. Visit the given links to know more.